AI for Monitoring: Four Checks On Call Teams Need First

AI for monitoring works best with clean alerts, location checks, SLOs, playbooks, and gated MCP access. Learn the on call steps that speed triage.

AI assistants cut the time between an alert and the first useful piece of evidence, but only when alerts are low-noise and the assistant can discover your telemetry through an MCP-style interface. Feed it symptom-first signals and it gathers context, proposes hypotheses and frees you to troubleshoot. Feed it noisy pages and it simply produces confident noise.


TL;DR:

  • Page only on user impact symptoms that persist across consecutive checks and fail from a second location, then rank urgency by SLO burn rate.
  • Start with read only MCP access to monitors, incidents, telemetry, and change logs; require scoped permissions, audit records, and human approval for every write.
  • Synthetic checks with trace IDs and HTTP span details can connect a failed checkout to a timed out payment provider call.
  • Keep playbooks current and combine regional failures, recent changes, and prior incidents in one dashboard; compare the assistant’s findings with engineer evidence after each incident.

Uptime Beacon
Reduce False Alarms Before Adding AI
Uptime Beacon confirms incidents after consecutive failures, then lets AI assistants inspect monitors, incidents and check history through MCP.
Explore Uptime Beacon

Table of Contents

How AI assistants fit into the monitoring workflow

The assistant sits between the page and the dashboard. Google’s SRE team describes its main value in incident response as reducing human latency by automating evidence gathering, so engineers spend their attention on higher-level problem solving. Think of it as a fast junior colleague who pulls the data before you finish opening your laptop.

In practice the assistant handles tasks like these:

  • Pulls the monitor state and recent incident history for the affected service.
  • Checks failure status region by region to separate local network trouble from a real outage.
  • Collects related logs, metrics, traces and recent changes into one incident-specific view.
  • Suggests useful next checks, ranked by how much each would narrow the cause.

Notice what is missing: blind remediation. Teams that get value from assistants use them for investigative synthesis and hypothesis generation, and keep autonomous fixes secondary and gated by safety checks. The payoff is less context switching. Instead of hopping between tabs, you read one concise summary and decide.

Pro Tip: Ask the assistant for evidence first and a diagnosis second. “Which regions are failing and since when?” is a better opening prompt than “what’s wrong?”

Why low-noise alerts and multi-location confirmation come first

An assistant is only as good as the signal it receives. Google’s SRE guidance says monitoring should not require a human to interpret it, and that effective alerting is symptom-based. Poor signal-to-noise degrades diagnostics for people and for AI alike. Before connecting anything, do this groundwork:

  1. Alert on user-impact symptoms, using signals such as latency, traffic, errors and saturation as your checklist.
  2. Require persistence: open an incident only after several failures in a row, so a single dropped probe never pages anyone.
  3. Confirm from a second location. If one probe fails and another succeeds, you are probably looking at a network blip, not an outage.
  4. Tie severity and paging thresholds to SLO burn rates, so the assistant prioritizes incidents that threaten your objectives. SRE practice uses SLOs to separate noise from real emergencies.

Each step shrinks the pile of events the assistant has to reason about. A page that survives all four is worth an engineer’s attention and worth the assistant’s effort. Our own write-up on confirming failures at two locations goes deeper on the safety side of this.

Connecting an AI assistant with MCP: what to expose and what to gate

The Model Context Protocol (MCP) gives assistants a standard way to discover what a system can tell them. incident.io’s documentation describes a remote MCP server that lets assistants query incidents, analyze alerts, check who is on call and pull telemetry from connected observability platforms, so the agent never has to chew on raw noisy signals. Use the same pattern for your own stack:

  • Expose read-only access first: monitors, incidents, recent check history, telemetry and change logs.
  • Let the assistant discover capabilities (incident lookup, telemetry queries) and return structured context rather than free-form text.
  • Gate every write action behind human confirmation, ideally with a dry run and an approval step.
  • Scope permissions tightly and keep an audit log of every query and action.
  • Never enable “allow changes” until read-only queries have behaved well for a while, and keep destructive actions out of reach entirely.

Start in a test team or a single low-risk service. Run a few real incidents through read-only mode, compare the assistant’s evidence to what your engineers found, and only then widen the scope.

Playbooks, investigation dashboards and SLO-driven triage

AI output only helps if it leads to consistent, auditable action. That means the human side of the process has to be in order:

  • Current playbooks. An assistant works best when it can surface the exact playbook section for the detected symptom. Stale playbooks make it confidently point at the wrong step. Our incident playbook checklist is a reasonable template to adapt.
  • One investigation dashboard. Compile region-level failures, recent rollouts and similar past incidents in a single view, so both the assistant and the responder start from the same facts.
  • SLO-driven escalation. Page by burn rate, not by raw error counts, and let the assistant’s suggestions feed those rules.
  • Defined incident roles. Google’s incident guide describes roles such as incident commander, communications lead and operations lead, and notes that automation should free on-callers to focus on mitigation. Slot the assistant into that structure as a source of evidence, never as a replacement for a role.
  • Blameless postmortems. Feed what the assistant found, and what it missed, back into playbooks and alert rules.

When these pieces line up, you can measure the effect where it counts. Faster evidence gathering shortens the early phase of recovery; MTTR can help measure it.

Pro Tip: After every incident, ask which playbook line the assistant should have surfaced and didn’t. Fix that line, not the prompt.

Incident review identifies and fixes a missing playbook step

Synthetic checks and OpenTelemetry: better signals for better hypotheses

A plain “is it up?” probe tells the assistant very little. Synthetic checks that exercise real user paths, paired with traces, give it something testable.

  • Run synthetic HTTP and browser checks to catch user-facing failures, and record a test ID for each run.
  • Return trace IDs, or full traces, with synthetic results. The assistant can then link a front-end symptom to the backend work behind it.
  • Follow OpenTelemetry’s HTTP span conventions: populate attributes such as server.address, server.port and error.type so traces correlate cleanly.
  • Add trace-based assertions. Synthetic monitoring with OpenTelemetry lets you assert internal behavior, such as database queries and third-party calls, as part of the check itself.

With that data, the assistant can say “the checkout probe failed because the payment provider call timed out in the trace,” instead of “checkout is down.” That is a hypothesis you can verify in seconds.

Getting-started checklist for on-call teams adding AI to monitoring

You can work through this in a day or two:

  1. Audit your alerts. Retire the noisy ones and convert email clutter into symptom-based pages and dashboards.
  2. Turn on confirmation from multiple locations for uptime checks and synthetics.
  3. Stand up an MCP-style interface with scoped, read-only access, and test read-only queries first.
  4. Publish short playbook snippets for your top symptoms and define which actions need approval.
  5. Run a tabletop drill or simulated incident to see whether the assistant’s evidence matches what your team would gather.

What I’d tell a team adopting AI for monitoring

Most of the value comes from boring discipline: SLOs, current playbooks and honest postmortems. An assistant amplifies whatever process it plugs into, good or bad. Expect it to speed up evidence collection, not to own the decision. The team still chooses the mitigation, communicates with customers and fixes the underlying weakness afterward. If a drill shows the assistant missing something, treat that as feedback on your runbooks and telemetry, because that is usually where the gap actually lives.

— Aaditya Parashar

How Uptime Beacon puts these prerequisites into practice

Uptime Beacon

We built Uptime Beacon around the groundwork this guide describes: incidents open only after repeated failures are confirmed from multiple locations on paid plans, and an MCP endpoint lets Claude, ChatGPT, Cursor or VS Code read monitors and incidents on every plan. Add heartbeat checks for cron jobs, certificate and domain expiry watches, public status pages and EU-stored results. Start on the Free plan, no card required.

FAQ

Can AI assistants replace on-call engineers?

No. They shorten the time to evidence by gathering monitor state, incident history and region-level failures, but your team still owns decisions and fixes. Google’s SRE team frames the benefit as reducing human latency, not removing humans.

What is MCP and why does it matter for monitoring?

MCP, the Model Context Protocol, is a standard way for an AI assistant to discover and query a system’s data and tools. For monitoring, it lets the assistant read monitors, incidents and telemetry in structured form instead of guessing from raw alerts.

How do I stop an AI assistant from acting on false alarms?

Fix the signal before connecting the assistant. Alert on symptoms, require several consecutive failures and confirm from multiple locations, so only persistent problems reach it.

Is it safe to let an assistant change monitors or incidents?

Start read-only. Enable changes only after testing, with scoped permissions, audit logs and human approval for write actions, and keep destructive operations unavailable.

Sources

Put your site on it. Sleep through the blips.

Add your first monitor now. If your site is fine, you will not hear from us.

Monitor it free
Sign up with GoogleOpening Google…
Free plan, no cardSign up with Google or email